|
|
 |
CHEMICAL PROCESS PUMPS - "PPF"
Chemical Process Pumps Manufacturer for Chemical and Industrial Application |
| Capacity Q Up to |
400 M³ / Hr |
| TDH - H - up to |
140 MLC |
| Speed |
960 / 1450 / 2900
RPM |
| Temperature |
-10 ºC to +250 ºC |
| Working Pressure |
40 Bars |
|
 |
"Flowchem" Series PPF pumps are "Centrifugal Process Pumps" in Back Pull-out Construction , Horizontal, Foot Mounted, Single stage, End suction and Top Centerline Discharge, confirming to DIN 24256 / ISO 2858, standards and in general confirming to API 610 as well.
PP Pumps Application:
|
Industry |
Services |
| Chemical, Dyes And Intermediates |
Organic/Nonorganic Chemical |
| Oil Extraction And Waste Oil Refineries |
Hydrocarbons / Volatile Liquids |
| Bulk Drugs & Pharmaceuticals |
Dyes & Intermediates |
| Effluent Treatment Plants |
Water Treatment & Distribution System |
| Heating & Air Conditioning Plants |
Thermic Fluid / Hot Oil |
| Cooling Towers |
Corrosive / Abbrasive Liquids |
Construction Options for Chemical Process Pumps:
- Chemical Process Pumps Offered with closed or Semi Open impeller.
- Impellers are provided either with Back Vane or Back Wear Ring to minimize Axial Thrust and Gland Leakage.
- Flange Rating PN 16 to PN 64 and drilled to DIN standard to meet ISO 2858 requirements.
- Flange Rating to BS / ASA Standards also offered.
- Various Shaft Sealing Available are,
- Gland Packing ( ASB. / NON ASB. depending on the service.)
- Moulded Graphite Rings.(GRAFOIL PACKING)
- Mechanical Seals (Single or Double Mechanical Seal
Arrangements.)
- Jacketing for heating/cooling offered for Casing, S/Box, Casing Pedestal and Bearing- Housing,
- Standard Bearing / Special Heavy Duty Bearing arrangements available.
Materials of Construction for Chemical Process Pumps:
- As Per Astm / Din Standards
- Graded Grey Cast Iron
- Carbon Steel(Wcb) / Alloy Steel
- Cf8, Cf8M, Cf3, Cf3M (Ss316L), Alloy 20, Cd4Mcu
- Nickel & Ni-Alloys, Ni-Resist, 2% Nici, R 55, Hastelloy -B / C
- Gun Metal / Bronze
|
