|
 |
|
|
 |
| Capacity Q Up to |
400 M³ / Hr |
| TDH - H - Up to |
140 MLC |
| Speed - n - Up to |
960 / 1450 /
2900 RPM |
| Temperature |
-10° C to +250° C |
| Working
Pressure |
40 Bar |
| Pumps Size DN |
32 mm to 200 mm |
|
 |
FLOWCHEM make CWP series of pumps are most economical & efficient end suction, single stage horizontal centrifugal pumps in back pull out construction. They are foot mounted with top center line discharge. They are available in wide range of heads & discharges. Due to high efficiency & economical design pumping operation cost reduces tremendously They are confirming to DIN 24255 with pressure sustaining capacity of 15 bars.
|
Industry |
Services |
| Chemicals, Dyes & Intermediates |
Cooling Water
Circulation |
| Oil Extraction And Waste Oil Refineries |
Water Treatement
& Distribution System |
| Cooling Towers |
Hot Water
Circulation |
| Effluent Treatment Plants |
|
| Bulk Grugs &
Pharmaceuticals |
|
Various Construction features
- CWP Pumps are Offered with Closed Impeller.
- Impellers are provided either with Back Vane to minimize Axial Thrust and Gland
Leakage
- Flange Rating is of PN 16 and drilled to DIN
standards
- Shafts are sealed by Gland Packing (NON ASB. depending on the service.)
- Standard Bearing Arrangements are provided to take axial as well as radial load on shaft.
Known as Centrifugal Water pump, Centrifugal Water
Transfer pump, Centrifugal High Flow Water pump, Centrifugal
Hot Water pump, Centrifugal Water pumps, etc.
|
|
|
|
|
